Now you've all seen wagons with go kart wheels and wondered how to make them fit your wagon?
It can get complicated but we are here to help!
There are three types of kart wheels.
- Historic wheels
Different fitment hubs and are generally heavier than modern kart wheels
- Hubbed wheels
These are wheels that require hubs to fit onto an axle.
Most common ( and used by us ) are 17mm but they can come in 25mm.
All rear wheels need hubs but you can buy fronts which require hubs too, this will add to your build by roughly £50
- Bearing wheels
Front wheels usually have bearings which can slide straight onto a axle.. ( 17mm or 25mm )
As mentioned above, you can buy the fronts which require hubs.
very easy to spot as if you look in the wheel you will see a bearing and not 1 big hole and 3 bolt holes.
- Hubs
Hubs come in different lengths and with different bearings..
ALL chopped wagons kit requires 17mm bearings and 75mm long.
- Adapters for standard wagons
We make adapters for people with standard wagons but want better wheels.
these slide on over your axles and you can then bolt on wheels, for instant cool parent points!
Readily available in the shop.
If you haven't found the answer you were looking for, please send us a message and we will be happy to help